| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,090 Posts1,056,026 Members48,432 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2005 Posts: 266 Shop Shark | | Shop Shark Joined: Nov 2005 Posts: 266 | What is the width of each board in a stepside bed from 55 second to 66? I'm working on installing my own wood, and I'd like to know how to cut it for the strip groves, length, width, and thickness? Thanks for your help. | | | | | Joined: Jul 2006 Posts: 79 Wrench Fetcher | | Wrench Fetcher Joined: Jul 2006 Posts: 79 | | | | | | Joined: Nov 2005 Posts: 266 Shop Shark | | Shop Shark Joined: Nov 2005 Posts: 266 | Thanks, Tim. I added that to my bookmarks file for future reference. | | | | | Joined: May 2007 Posts: 292 Wrench Fetcher | | Wrench Fetcher Joined: May 2007 Posts: 292 | Hmmm Not the bed wood i was thinking of. . .
I ran 2x12's from left to right till i got to the end of the truck than i used 2-2x12's on each side for side letting them hang down about 4 inches than i put a 2x4 along bottom on the back cutting out where my 4 oval LED tail light's were look's good built the bulk head with a 2x12 and 2x8. . . bolted a 2x4 behind the tires and mounted my mud flap's Look's awsome only cost about $400.00. . .I'll try and get some pic's. . .
Mike
1962 GMC K3000, GMC-379 V6.
| | | | | Joined: May 2007 Posts: 292 Wrench Fetcher | | Wrench Fetcher Joined: May 2007 Posts: 292 | sounds good i a;lready built my bed best looking wodden beded dually in town and it's only 7ft long. . .
you could say i got K-3000 sort box. .
Mike !
1962 GMC K3000, GMC-379 V6.
| | |
|
|
| |
