| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,014 Posts1,055,328 Members48,419 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2006 Posts: 74 'Bolter | | 'Bolter Joined: Jan 2006 Posts: 74 | ok so i want to buy a 1964 shortbed fleetside on ebay i already found one and im wondering how hard would it be to change one of these? mine is in very bad shape so this is important. | | | | | | Anonymous Unregistered | | Anonymous Unregistered | If you are asking how you can remove one bed side it should not be a problem. You have bolt connections at the front panel, more connections along the angle strip and then at the rear cross sill that will have to be removed on the side you want to replace. The inner fender well will also have to be disconnected from the bed side. You should be able to do this with the bed still on the frame but you will probably need a helper. | | |
|
|
| |
