| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,087 Posts1,056,115 Members48,435 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2000 Posts: 364 Shop Shark | | Shop Shark Joined: Feb 2000 Posts: 364 | Mine is a "good news, bad news" situation. The Good News is I was lucky enough to find a farmer in Kansas who had an old hulk of an AD Panel that had 12 original pieces of stainless fender trim. I bought the trim from him a while back;"bad news" have since lost or misplaced the middle trim piece from passengers side rear fender.
I have searched all over for a replacement for this piece with no success...I've even bid on the recent set that was on ebay, but I couldn't justify $1500. for another set.
Does anyone know or have contact with someone who has the talent to fabricate this piece for me? It's a diifcult job because of the curved profile and rounded contours of the trim piece. I have a good original from another mounted set that can be used as model. Any help/direction would be appreciated. | | | | | Joined: May 2003 Posts: 22 Wrench Fetcher | | Wrench Fetcher Joined: May 2003 Posts: 22 | I've heard the guys from GE antique creations out of Sante Fe Springs will make one or 2 for you I don't know how well they are made but do know a friend bought a pair of fender spears from them and was happy with them, I'll try to locate the # if your interested. | | | | | Joined: Feb 2000 Posts: 364 Shop Shark | | Shop Shark Joined: Feb 2000 Posts: 364 | Thanks, Manuel...I've been in contact with GE Creations and they are almost exclusively involved with fender spears.(I bought a set from them a couple of years ago...expensive, but outstanding quality). We talked about fabricating my missing piece but they were reluctant to attempt the project. | | | | | Joined: Jun 2001 Posts: 379 Shop Shark | | Shop Shark Joined: Jun 2001 Posts: 379 | | | | | | Joined: Jan 2000 Posts: 1,586 Extreme Gabster | | Extreme Gabster Joined: Jan 2000 Posts: 1,586 | Ray is available for quality sheetmetal parts ,contact him at [email protected] with any requests. | | | | | Joined: Feb 2000 Posts: 364 Shop Shark | | Shop Shark Joined: Feb 2000 Posts: 364 | Thanks...I've been in contact with the Metalman...I'm sending Ray some pics of the trim pieces and he'll make a determination if he can reproduce the piece. | | |
|
|
| |
