| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,180 Posts1,057,150 Members48,464 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#24014 02/19/2002 11:00 PM | Joined: May 2001 Posts: 16 Member | | Member Joined: May 2001 Posts: 16 | I would like to know if the 8 lug rims from a 79 GMC will swap with the ones on my 54 1 ton. I have a chance to get them free but want to make sure it is a match. If not what years will match up? Thanks for the help.
55.1 3800
| | |
#24015 02/20/2002 8:42 AM | Joined: Feb 2000 Posts: 587 'Bolter | | 'Bolter Joined: Feb 2000 Posts: 587 | Good chance! The bolt pattern is same, the hole in middle is the question. Measure yours and the new ones and check. Some say clearance on the tie-rods may be a problem. Can't you "borrow" one and try it on your truck before purchasing?
G.L. Grumpy's
Old Iron Ranch
Huntington, IN 46750
MM R tractor, Speedex
and Power King tractors
| | |
#24016 02/20/2002 5:12 PM | Joined: May 2000 Posts: 234 Shop Shark | | Shop Shark Joined: May 2000 Posts: 234 | One problem with the original front axle on the '54 is the clearance between the wheel and the steering arm. On a stock wheel it's less than 1/2 inch - meaning if the offset of a later wheel is much different, it may interfere.
The bolt spacing is identical, but the size of the hole is slightly larger (due to larger lugs) on the later wheels. I am using early wheels on a later axle with no problems.
-Boyo
'48 Willys CJ-2A / '55.1 Chevy 3600 / '66 Austin-Healey 3000 / '04 Volvo wagon (parenthood!?)
| | |
#24017 02/20/2002 11:48 PM | Joined: May 2001 Posts: 7,438 Extreme Gabster | | Extreme Gabster Joined: May 2001 Posts: 7,438 | Remember putting smaller diameter tires on it will increase engine RPM. | | |
#24018 02/22/2002 8:23 AM | Joined: Feb 2001 Posts: 39 Member | | Member Joined: Feb 2001 Posts: 39 | I'm still trying to find a donor wheel for my 1 ton. The problem i had with a few i've tried was they didn't clear the backing plate on the rear. haven't even messed with the front yet. 
1948 GMC 250 Series Flatbed
| | |
|
|
| |
