| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,109 Posts1,056,258 Members48,437 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#18899 01/18/2005 3:35 AM | Joined: Apr 2004 Posts: 42 Apprentice | | Apprentice Joined: Apr 2004 Posts: 42 | I am swapping out a 216 with a rebuilt 235 the 216 oil pump line is to short so I must build one. The original was 7/16 steel.
Will 3/8 copper work ?
Why was the line 7/16 on 3/8 fittings originally ?
Thanks, Kelly
53 3100 | | |
#18900 01/18/2005 11:20 PM | Joined: Jan 2000 Posts: 1,586 Extreme Gabster | | Extreme Gabster Joined: Jan 2000 Posts: 1,586 | Are you saying you're installing a 235 engine and trying to use the 216 feed line from pump to block? If so,find the proper 235 line,copper is a bad choice in my opinion. I believe the steel line is 3/8 inside diameter,not the usual off the shelf tubing | | |
#18901 01/19/2005 12:25 AM | Joined: Apr 2004 Posts: 42 Apprentice | | Apprentice Joined: Apr 2004 Posts: 42 | Thanks I got the same advice from a mechanic buddy
We got the line built with all new fittings & 3/8 steel the original was 7/16 steel. Where my problem started was the 216 line is about 2" shorter than the 235.
Kelly
53 3100 | | |
|
|
| |
