| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,077 Posts1,056,019 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2005 Posts: 52 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2005 Posts: 52 | When shopping for a rubber mat for my 66 C-10 I was asked whether or not it was a small or large hump. How do I know what I have got??
Thanks | | | | | Joined: Feb 2002 Posts: 12,029 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Feb 2002 Posts: 12,029 | if it's not for a camel, what they're talkin about is the 3spd had a lower floor cover over the tranny, the 4spd had a higher one, so, what trans ya got is what ya get - unless someone changed the trans from 4 to 3, in which case ya get the 4 unless they also changed the trans floor cover, then ya might want the 3  you get the idea! Bill | | | | | Joined: Apr 2005 Posts: 52 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2005 Posts: 52 | I bought the truck with no motor or trans...it was a V8 manual truck but I dont know if it was a 3 or a 4 speed.
Andy | | | | | Joined: Feb 2002 Posts: 12,029 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Feb 2002 Posts: 12,029 | any sign of linkage on the column and no hole in the floor = 3 spd - no sign of linkage, but hole in the floor pan = 4spd - trans cover missing, take yer pick!
Bill | | |
|
|
| |
