Winter is Coming
Time to think about winterizing your Bolt.
A good Tech Tip WINTERIZING YOUR TRUCK including a link back to the Forums for additional tips.
This truck project has been discussed significantly on this forum over the last few years, but due to a job layoff, we are moving and I have to sell it. It is a bit of a Frankentruck, as it is a 1940 cab and front clip, with a '37-39 bed and rear fenders all on a '41-'46 chassis. It is titled as a 1940 Chevrolet pickup with a clear title in my name. The engine is a 1954 Chev 235 6 cylinder in very good shape. The brakes have been freshly redone. I drove it out of the garage a couple days ago under its own power. Included are many hard to find vintage parts. Not too far from being ready for the street. I have a whole lot more photos...let me know what you want to see.
$9,999 or Best Offer
Last edited by Gdads51; 11/21/20262:22 PM. Reason: update title to show status change
Nick 1940 KC Model 1/2 Ton Pickup Project (with '37-'39 Bed and what we think is a '42-'46 Frame) Taos, New Mexico
Nick - So sorry to hear of the job predicament and the necessity to sell the truck.
I've followed along since the beginning and know that you've put a huge amount of hard work and effort to get the truck where it is. I think we can all say that whoever brings this truck home will have something well done to this point and very much on the way to being finished (at least as finished as we ever get our trucks - lol).
Best of luck on you sale!
~ Dan 1951 Chevy 3 window 3100 Follow this story in the DITY Gallery "My Grandpa Carl's Truck and How it Became Mine" 1966 Chevelle (Wife's Hot Rod) | 2013 Chevy Silverado (Current daily driver) US Army MSG Retired (1977-1998) | Com Fac Maint Lead Tech Retired (1998-2021)
Thanks Dan! I know that you have assisted and been along for the ride since the beginning. My wife was working for a high tech startup that was done wrong by one of the largest corporations in the world, so her retirement didn't turn out the way we expected...But, we are still doing okay and are pivoting to a new adventure...we are moving onto a boat. (We have lived on a boat once in the past and really enjoyed it.) I have had so much pleasure in working on the truck to this point that, although I would like to be able to finish it up, the good outweighs the bad and it has been a very positive experience. What I have learned and experienced here on the forum have been great, and the comradery I have felt as a part of this community has been outstanding! I won't be able to see the project through to completion (whatever that is), but would do it again without question.
Nick 1940 KC Model 1/2 Ton Pickup Project (with '37-'39 Bed and what we think is a '42-'46 Frame) Taos, New Mexico
Nick - Just remember, when you do sell your truck, even though it's not likely you'll be buying another while enjoying your "...living on a boat...", you're still a full fledged 'Bolter and hope you'll continue to hang around with us in the virtual shop. Your experience and knowledge learned can surely help a fellow 'Bolter at some point along the way and it would be great to stay in touch!
Once again - best wishes on your sale!
~ Dan 1951 Chevy 3 window 3100 Follow this story in the DITY Gallery "My Grandpa Carl's Truck and How it Became Mine" 1966 Chevelle (Wife's Hot Rod) | 2013 Chevy Silverado (Current daily driver) US Army MSG Retired (1977-1998) | Com Fac Maint Lead Tech Retired (1998-2021)
It went to a fellow who lives about 3 hours south of our house. He has experience working with 1940 Chevy trucks and seemed like a good guy. I told him about the Stovebolt.com forum and that he could come to this forum and see most of the details of my experience with the truck. He has promised to send progress photos.
Nick 1940 KC Model 1/2 Ton Pickup Project (with '37-'39 Bed and what we think is a '42-'46 Frame) Taos, New Mexico
Sorry to be late to the party Nick. A BIG CONGRATS on your successful sale!!!
Sounds like it has found a good home and hope the new owner decides to come join us and continue the trucks story.
As with any ad, this one must find it's way to the big round file in the sky since its job is done. But I'll leave it up for a bit longer so anyone else that may not have seen the results can see/share in your success.
Do check in and keep in touch!
~ Dan 1951 Chevy 3 window 3100 Follow this story in the DITY Gallery "My Grandpa Carl's Truck and How it Became Mine" 1966 Chevelle (Wife's Hot Rod) | 2013 Chevy Silverado (Current daily driver) US Army MSG Retired (1977-1998) | Com Fac Maint Lead Tech Retired (1998-2021)