The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Brrrr

Winter is Coming
Time to think about winterizing your Bolt.
Stored trucks should have a high-quality security system. A good Tech Tip
WINTERIZING YOUR TRUCK
including a link back to the Forums for additional tips.
Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
4 members (54farmtruck, Wayne67vert, Bill Hanlon, 1 invisible), 166 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,299
Posts1,058,705
Members48,493
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#1615625 11/20/2026 7:51 PM
Joined: Dec 2013
Posts: 47
R
'Bolter
'Bolter
R Offline
Joined: Dec 2013
Posts: 47
I’m considering lowering my ‘54 2-3”. I understand that I can lower the rear by swapping the location of the springs but I wonder if that upsets the geometry of the torque tube diff to the tranny. Also, what’s the easiest, cheapest way to lower the front using the stock axle AND put in disc brakes using original wheels?
Brian

Ribside #1615627 11/20/2026 10:06 PM
Joined: May 2015
Posts: 11,292
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Joined: May 2015
Posts: 11,292
Lowering the rear won't really affect the u-joint much. It will reduce the angle. You don't want it completely straight (although that may only apply to u-joints with needle bearing cups) but it'll probably be a couple degrees. You should loosen the pivot bolts on the spring mounts until you have it setting where you want it and then tighten those to normalize the rubber bushings in them.
Can't really say about the front axle short of new flatter springs if you're using the stock axle.


Kevin
1951 Chevy 3100 work truck
Follow this saga in Project Journal
Photos
1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car)
Busting rust since the mid-60's
If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
Ribside #1615639 11/21/2026 3:14 AM
Joined: Feb 2004
Posts: 29,961
H
Kettle Custodian (pot stirrer)
Kettle Custodian (pot stirrer)
H Offline
Joined: Feb 2004
Posts: 29,961
Any kind of lowering method involving using the stock axle will severely limit the suspension travel. The vehicle will bottom out on bumps. The simplest (and most expensive) option will be a dropped axle.
Jerry


"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!
Ribside #1615653 11/21/2026 7:26 AM
Joined: May 2015
Posts: 11,292
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Joined: May 2015
Posts: 11,292
On looking at pics of my truck (which should be similar to your 54), I don't think changing the location of the springs in relation to the rear axle will help much, as the springs are already under the axle tube.
Attachments
IMG_4028.JPG (377.17 KB, 28 downloads)


Kevin
1951 Chevy 3100 work truck
Follow this saga in Project Journal
Photos
1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car)
Busting rust since the mid-60's
If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
Ribside #1615657 11/21/2026 1:27 PM
Joined: Mar 2017
Posts: 588
S
Donald S.
Donald S.
S Offline
Joined: Mar 2017
Posts: 588
Brian, I put lowering springs all around my truck. Hot Rod Lincoln is right it does bottom out in the front only. I like the look of the slightly lowered stance. I did have to make a new leaf spring shackle to raise the back 1” as my wider tires slightly rubbed my fenders.
Attachments
IMG_6086.jpeg (444 KB, 17 downloads)


1949 Chevy Carry All
Follow the resto in the Project Journals

1953 Chevy 5-window
"Frame off Restoration"
Follow the resto in the DITY



Please don't tell my wife how much this thing cost!
Ribside #1615659 11/21/2026 1:54 PM
Joined: Mar 2007
Posts: 3,509
T
Crusty Old Sarge
Crusty Old Sarge
T Offline
Joined: Mar 2007
Posts: 3,509
I have a 4 inch drop axle on my '59. The axle is one of Nostalgia Sids, he does really quality work. If I were to do it?again I wouldn't use as deep a drop, 4 inches puts the axle pretty close to the pavement. I currently have 15 inch wheels and tires.

https://droppedaxles.com/
Attachments
20201111_151248.jpg (177.87 KB, 16 downloads)
'59 Apache 4 inch drop axel
20201111_124251.jpg (330.5 KB, 15 downloads)
4 inch drop axel 2


~ Craig
1958 Viking 4400
"The Book of Thor"
Read the story in the DITY
1960 Chevrolet C10
"A Family Heirloom"
Follow the story in the DITY Gallery
'59 Apache 31, 327 V8 (0.030 over), Muncie M20 4 Speed, GM 10 Bolt Rear... long term project (30 years and counting)

If you don't like driving yourTruck, you won't drive yourTruck..| Living life in the SLOW lane

Moderated by  Dusty53, SWEET 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0