The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Fixing the old truck

BUSY BOLTERS
Are you one?

Where is it?? The Shop Area

continues to pull in the most views on the Stovebolt. In August alone there were over 22,000 views in those 13 forums.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
1 members (Hotrod Lincoln), 474 guests, and 1 robot.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics126,777
Posts1,039,267
Members48,100
Most Online2,175
Jul 21st, 2025
Step-by-step instructions for pictures in the forums
Previous Thread
Next Thread
Print Thread
Joined: Dec 2016
Posts: 165
S
'Bolter
'Bolter
S Offline
Joined: Dec 2016
Posts: 165
Had to order a part from Jim Carter (rear main seal, rubber) so called them to make sure it works for a '54 engine as their web site doesn't list it. Was told by the sales person that Jim Carter gives 10% discount to veterans. But , you have to mention it.

S2

Last edited by klhansen; 03/07/2024 7:13 PM. Reason: added info to title

Stewart2
1955.1 3100
Both Owner and P/U have lots of miles, lots of history and need LOTS of TLC
Jack of several trades and experiences; Master of none
Joined: May 2015
Posts: 9,830
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Joined: May 2015
Posts: 9,830
I did not know that. I could have saved a bunch of money if I had known.

Thanks for the post. thumbs_up


Kevin
1951 Chevy 3100 work truck
Follow this saga in Project Journal
Photos
1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car)
Busting rust since the mid-60's
If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
Joined: Sep 2009
Posts: 4,392
Gearhead, Stovebolt Tech and Parts Tracker, Mod for Swap Meet and GTT
Gearhead, Stovebolt Tech and Parts Tracker, Mod for Swap Meet and GTT
Joined: Sep 2009
Posts: 4,392
Stewart, Thanks for sharing that excellent bit of info. thumbs_up I think this post may need to get moved to a better place for folks to see and jog a memory now or then to take advantage of this great offer.

Moved to the Legion Hall for everyone to see!

Thanks again! salute2

Last edited by Gdads51; 03/09/2024 3:26 AM.

~ Dan
1951 Chevy 3 window 3100
Follow this story in the DITY Gallery
"My Grandpa Carl's Truck and How it Became Mine"
1966 Chevelle (Wife's Hot Rod) | 2013 Chevy Silverado (Current daily driver)
US Army MSG Retired (1977-1998) | Com Fac Maint Lead Tech Retired (1998-2021)
Joined: Apr 2004
Posts: 5,139
P
Authorized Pest
Authorized Pest
P Offline
Joined: Apr 2004
Posts: 5,139
If it's a discount for Vets, maybe a good post (even if a dup) in Legion Hall. wink


~ Peggy M
1949 Chevrolet 3804
"Charlie" - The Stovebolt Flagship
In the Gallery || In the Gallery Forum
"I didn't see this one coming. I don't see much of anything coming. :-O"
Joined: Sep 2009
Posts: 4,392
Gearhead, Stovebolt Tech and Parts Tracker, Mod for Swap Meet and GTT
Gearhead, Stovebolt Tech and Parts Tracker, Mod for Swap Meet and GTT
Joined: Sep 2009
Posts: 4,392
Good call moving it to the Legion Hall. Hope all reading here will spread the word to fellow Veteran Stovebolters so they can enjoy this nice benefit from Jim Carter! thumbs_up


~ Dan
1951 Chevy 3 window 3100
Follow this story in the DITY Gallery
"My Grandpa Carl's Truck and How it Became Mine"
1966 Chevelle (Wife's Hot Rod) | 2013 Chevy Silverado (Current daily driver)
US Army MSG Retired (1977-1998) | Com Fac Maint Lead Tech Retired (1998-2021)
Joined: Dec 2016
Posts: 165
S
'Bolter
'Bolter
S Offline
Joined: Dec 2016
Posts: 165
UPDATE!!!!!!!!! Even though I was told by the salesman that Vets get a 10% discount, the Turkey didn't give me a discount!!!!!!!!!!!!! Don't know if it was true or not.

S2


Stewart2
1955.1 3100
Both Owner and P/U have lots of miles, lots of history and need LOTS of TLC
Jack of several trades and experiences; Master of none
Joined: May 2015
Posts: 9,830
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Joined: May 2015
Posts: 9,830
Jim Carter did advertise a veteran's discount sale a while back. The ad said they needed an ID sent to them.


Kevin
1951 Chevy 3100 work truck
Follow this saga in Project Journal
Photos
1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car)
Busting rust since the mid-60's
If you're smart enough to take it apart, you darn well better be smart enough to put it back together.
Joined: Sep 2009
Posts: 4,392
Gearhead, Stovebolt Tech and Parts Tracker, Mod for Swap Meet and GTT
Gearhead, Stovebolt Tech and Parts Tracker, Mod for Swap Meet and GTT
Joined: Sep 2009
Posts: 4,392
Just a note here to confirm that Jim Carter does give and honor a 10% discount to Active Duty, Military Retirees and Veterans. The key to that as Kevin mentioned above is they must see or be provided a copy of your DOD issued ID and they need to establish an account in their system to enter/save that confirmation. Once they have the ID confirmation, you don't need to provide it again. Their on line registration/order systems doesn't have the ability for them to see your ID when you sign up. If you aren't local, give them a call or email and ask how to get them a copy of the ID to lock that info into your account.

I actually went in person and shopped in the store about a week ago and was helped with my account, showed them the ID for confirmation and got the discount. The gal, IIRC her name is Cammie, set up my account while I was there with the ID verification saved so now I can place an order on line and still get the discount.

While there, I had a nice conversation with Jim Carter himself, got a freebie glass bowl fuel pump bowl securing bail from Jimmie (reportedly Jim Carter's right hand man on parts identification who I met him for the 1st time that day) and all the parts I had on my wish list. wink

To top it off, a few days later I got a small package in the mail from Jim with the below note and cool can wrap because he said he forgot to give it to me before I left the shop that day. Great folks and great shop IMHO! thumbs_up
Attachments


~ Dan
1951 Chevy 3 window 3100
Follow this story in the DITY Gallery
"My Grandpa Carl's Truck and How it Became Mine"
1966 Chevelle (Wife's Hot Rod) | 2013 Chevy Silverado (Current daily driver)
US Army MSG Retired (1977-1998) | Com Fac Maint Lead Tech Retired (1998-2021)
Joined: Apr 2004
Posts: 5,139
P
Authorized Pest
Authorized Pest
P Offline
Joined: Apr 2004
Posts: 5,139
We got one of those "wraps" in the mail earlier in the year. Very interesting thingamabob. I kept the paper (right here next to my pencil sharpener) that went with it. It's to remind me of asking him where he ordered them. LOL I thought they'd be fun as possible give-aways at Stovebolt events. With a Stovebolt logo, motto, etc. of course. grin One of these days.... Or, I'll pass it on to you, Dan, as a "next time you see him" ... as in The Round-up in the fall. wink

Thanks for posting those details on the military discount offered by Jim Carter.


~ Peggy M
1949 Chevrolet 3804
"Charlie" - The Stovebolt Flagship
In the Gallery || In the Gallery Forum
"I didn't see this one coming. I don't see much of anything coming. :-O"
Joined: Feb 2004
Posts: 28,674
H
Kettle Custodian (pot stirrer)
Kettle Custodian (pot stirrer)
H Online: Content
Joined: Feb 2004
Posts: 28,674
For those of us "non-retiree" vets who don't have a military ID, I wonder if they would honor a DD 214? The closest thing I've got to a military ID card with my picture on it is my VA medical card, and some of the patient info on that needs to be guarded pretty closely.

Stewart- - - -just as a point of information- - - -that rubber seal DOES NOT work on an engine made for a rope seal. It fits the groove just fine, but the depth of the groove is incorrect for any sealing to be done. The engine I'm working on for you will be a moot point- - - -since I'm machining it for a full circle lip seal that will never leak.
Jerry


"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln
Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt!
There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway
Love your enemies and drive 'em nuts!
Joined: Sep 2009
Posts: 4,392
Gearhead, Stovebolt Tech and Parts Tracker, Mod for Swap Meet and GTT
Gearhead, Stovebolt Tech and Parts Tracker, Mod for Swap Meet and GTT
Joined: Sep 2009
Posts: 4,392
Jerry, Next time I drop in to Jim Carters place, I will ask the question and post an update on what he says for ID requirements.


~ Dan
1951 Chevy 3 window 3100
Follow this story in the DITY Gallery
"My Grandpa Carl's Truck and How it Became Mine"
1966 Chevelle (Wife's Hot Rod) | 2013 Chevy Silverado (Current daily driver)
US Army MSG Retired (1977-1998) | Com Fac Maint Lead Tech Retired (1998-2021)
Joined: May 2015
Posts: 9,830
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Housekeeping (Moderator) Making a Stovebolt Bed & Paint and Body Shop Forums
Joined: May 2015
Posts: 9,830
Jerry, Here in Alaska, when you show the DMV your DD214, they will make a notation on your driver's license that you're a veteran. Tennessee has the same kind of program. LINK, so the next time you renew your driver's license, remember to take your DD214 with you.

I don't know, but I'll bet If you sent Jim Carter a copy of your DD214 and a picture of your driver's license, they'd sign you up for the discount.


Kevin
1951 Chevy 3100 work truck
Follow this saga in Project Journal
Photos
1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car)
Busting rust since the mid-60's
If you're smart enough to take it apart, you darn well better be smart enough to put it back together.

Moderated by  Achipmunk, John Milliman 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0
(Release build 20240826)
Responsive Width:

PHP: 8.3.11 Page Time: 0.034s Queries: 15 (0.029s) Memory: 0.6620 MB (Peak: 0.7690 MB) Data Comp: Zlib Server Time: 2025-09-22 05:06:05 UTC
Valid HTML 5 and Valid CSS