I need a little advice on how to remove the motor for my Harrison heater. I only see two nuts holding it in place. Those are off but the motor still feels secure in place.
Darren Current Project - 1950 3100 5 Window with a rebuilt 216 and 3 speed trans
The two nuts/bolts are all that is holding it in. On mine the gasket was stuck to the housing and motor and made it feel like there was some other fastener holding it on. Use a plastic scraper to get in between the gasket and motor housing and it will pop right out.
Last edited by stlcardinalsguy; 06/05/20216:50 PM.
