| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,068 Posts1,055,881 Members48,428 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#13949 04/20/2004 8:09 PM | Joined: Aug 2003 Posts: 108 'Bolter | | 'Bolter Joined: Aug 2003 Posts: 108 | Gentlemen,
When installing my latest 1954 235 engine in my '53 truck, I opted for a modern-style remote oil filter unit that uses a spin-on type filter. My oil pressure pegs out the 30 lb. gauge at idle, but decreases to the 15-20 lb. range at higher rpm. I know the engine is the "high pressure" 235 and this seems like too low an oil pressure. I know that the "full flow" oil filter decreases oil pressure. What are some acceptable guidelines? Thanks for the advice.
Regards,
Tyler Watts | | |
#13950 04/20/2004 8:54 PM | Joined: Oct 2001 Posts: 3,458 Extreme Gabster | | Extreme Gabster Joined: Oct 2001 Posts: 3,458 | Did you put a restrictor on the oil filter to keep the flow down? You need one. Since the filter is a bypass filter it will starve the engine for oil if the filter flows too much.
30psi is an acceptable oil pressure for a 235. The pressure should never drop at higher RPM.
Paint & Body Shop moderator
A lone amateur built the Ark. A large group of professionals built the Titanic. | | |
#13951 04/21/2004 1:58 AM | Joined: Aug 2003 Posts: 108 'Bolter | | 'Bolter Joined: Aug 2003 Posts: 108 | Mr. Bartlett,
Thanks for the advice. Where can I obtain said restrictor and what will it cost me? I have also heard that a larger filter will mitigate the drop in oil pressure. Would that alone be a sufficient solution?
Regards,
Tyler Watts | | |
|
|
| |
