| |
Click on image for the lowdown. 
====
|
| | Forums66 Topics128,050 Posts1,055,758 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
|
| THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
|
| | | Joined: Dec 2007 Posts: 79 'Bolter | | 'Bolter Joined: Dec 2007 Posts: 79 | Have a 1955 2nd series pickup with a 265 ci engine ,need help how the clutch return spring is hooked ? It should hook some where around the steering gear box. I maybe missing a bracket or something. Any help ,or picture very much appreciated . Thanks | | | | | Joined: Jun 2020 Posts: 37 Wrench Fetcher | | Wrench Fetcher Joined: Jun 2020 Posts: 37 | On my 65, it just goes through a hole in the frame. The hole is drilled up around where the VIN is stamped into the frame.
Last edited by Masterofnone; 10/01/2020 8:08 PM.
| | | | | Joined: Apr 2005 Posts: 2,097 'Bolter | | 'Bolter Joined: Apr 2005 Posts: 2,097 | It's been 20 years since I changed mine over to power steering but I seem to remember that there was a small bracket mounted on one of the bolts on the original steering box.
Fred
1956 3100 Pickup/Red/350/3sp OD/PS/Disc Brakes
1957 Bel Air Sport Coupe/Red/355/TH350/PS/Disc Brakes
2017 Silverado LT Single Cab SB/Black/5.3/6 Speed Trans
1947 Willys CJ2A w/F-Head engine
| | | | | Joined: Mar 2004 Posts: 6,214 'Bolter | | 'Bolter Joined: Mar 2004 Posts: 6,214 | Clutch spring attaches to a small ell bracket that's held in place by the oil pan bolt about 4" forward of the bellhousing. Mike B  | | |
|
|
| |
