| |
Click on image for the lowdown. 
====
| | |
7 members (Bill Hanlon, 55shaker, Hotrod Lincoln, Tim Canfield, DES57, moparguy, Gdads51),
112
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,195 Posts1,057,380 Members48,469 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#13735 03/11/2003 11:46 PM | Joined: Mar 2003 Posts: 49 Member | | Member Joined: Mar 2003 Posts: 49 | I heard that some 59 chevy panels came with a 283ci V8. Is there a special bellhousing that will let you bolt a 62 or later engine to the origional 3sp? Will a 60s truck bellhousing work with the stock clutch pedal and linkage? Will a granny low truck 4 sp bolt to the stock 235 3sp bellhousing? still trying to figure it out please help if you can. Thanks | | |
#13736 03/12/2003 5:24 AM | Joined: Feb 2001 Posts: 1,897 Member | | Member Joined: Feb 2001 Posts: 1,897 | 216, 235 and 261 engines will bolt up to the original bell-housing.
There are bell-housings that will allow you to mount the `63 and later inline engines to the tranny you have.(some alteration may be needed on the linkage depending on which housing you use and which clutch you use.
The SM420 4-speed tranny will bolt up to the housing you have.
There is enough good in the worst of us and enough bad in the best of us that it does not behoove any of us to criticize the rest of us.
-
-
Be yourself. If you are ever lost, It will be much easier to find yourself if you know who you are!
| | |
|
|
| |
