| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,076 Posts1,055,924 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2006 Posts: 6 Junior Member | | Junior Member Joined: Jun 2006 Posts: 6 | hey, I have a 64 chevy c10 and am going to either do a stock rebuild on the frontend or maybe lower it 2" and will add disc front brakes . advice needed on the best way to go about it . | | | | | Joined: Nov 2002 Posts: 1,002 Shop Shark | | Shop Shark Joined: Nov 2002 Posts: 1,002 | I'm going to do it on a C20 eventually, so I've payed attention post when I've seen them and there have been many, do a search in the archives and you should find them.
You didn't say whether you are going to stay with 6 or go 5 lug. From what I've read you can swap in a complete frontend from up to an 86 1/2 ton, change ball joints and use later spindles, since you are going to lower it anyway buy a kit. My 2 cents.
ttt
Larry
I don't own a vehicle that isn't old enough to drink.
| | | | | Joined: Jun 2006 Posts: 6 Junior Member | | Junior Member Joined: Jun 2006 Posts: 6 | I'm planning on keeping the 6 lug, and I started looking at a kit from what used to be Chevy Duty. | | | | | Joined: Jun 2006 Posts: 6 Junior Member | | Junior Member Joined: Jun 2006 Posts: 6 | I'm planning on keeping the 6 lug, and I started looking at a kit from what used to be Chevy Duty. Gonna keep shopping around . | | | | | Joined: Dec 2002 Posts: 3,440 Moderator - The Electrical Bay | | Moderator - The Electrical Bay Joined: Dec 2002 Posts: 3,440 | Those front end parts are not too difficult to change out... just make sure you have the right tools and be careful with the springs.
Another quality post.
Real Trucks Rattle
HELP! The Paranoids are after me!
| | | | | Joined: May 2006 Posts: 8,351 'Bolter | | 'Bolter Joined: May 2006 Posts: 8,351 | Check places that sell Moog, they have listings for most parts back to '47 on trucks. For '63-'66 all the parts are available from them.
Bill Burmeister
| | |
|
|
| |
