| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,078 Posts1,056,027 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Nov 2012 Posts: 41 Wrench Fetcher | | Wrench Fetcher Joined: Nov 2012 Posts: 41 | I am trying to put my parking brake linkage back together on my 1951 Chev 3100. There is a link hooked to the bar the pedal goes on. I have another link with 2 clevis on it. One is curved. The spring is hanging near the bar that pulls the cables for each wheel. I dont have the rod with the 2 hooks on it. does anyone have a picture of how that all hooks together? | | | | | Joined: Sep 2001 Posts: 29,269 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,269 | | | | | | Joined: Nov 2012 Posts: 41 Wrench Fetcher | | Wrench Fetcher Joined: Nov 2012 Posts: 41 | I have everything in that pic. I just know how the brake rod is attached the 1 inch bar that pulls on the cables for each rear wheel. There is a tab that is welded to that bar and i believe the piece of linkage I have connects to that. The link has a clevis on both ends but one is curved. I would think that would go to the rear but a pic would verify that. | | | | | Joined: Nov 2012 Posts: 41 Wrench Fetcher | | Wrench Fetcher Joined: Nov 2012 Posts: 41 | Got it. The brake rod was bent. There is a rubber guide on top the frame that dictates the angle of the brake rod. The other rod can only go one way. Thanks ttclederman for the picture. I have that together right. | | |
|
|
| |
