The Stovebolt Site Forums The Parking Lot '60-'66 Trucks Anyone have a 1960 Chevy 4X4 long bed stepside

Just wondering if anyone has one and what condition its in and how hard are parts to find.
Thanks

I have a 62 K20. I would say the hardest parts to get would be parking brake cables and the hardware in the drums. Transfer case gears and associated parts seem rare, however all bearings and seals are available. I've done a fair amount of work - fixed leaks, brake system, water pump, radiator, front end, exhaust, etc., no major problems finding things. My truck is in fairly god condition, needs some body work, but I use it regularly, with a couple 100 mile highway trips each year.

If you have a 57 Napco then you know about the drivetrain stuff. The rest would normally be a little easier than the 57 because it's newer. I think hood 2 yr only and dash 3 year. I've had no trouble so far finding new or used parts for my 1960 GMC 4x4. What else do you want to know? Is this a wanted ad?

I had some trouble finding rear shocks, parking brake cables, and 16 inch wheels and suitable tires. You find a long stepside bed you let me know. I can't think of much else that can't be found while looking in the C10, C20 areas.
Inline tube made some cables for me based on an old one I had. Shocks on ebay were hard to find, but once I found a good part number a few came through. Wish I bought some areas.
Condition? My 66 is wretched and beastly in the same breadth. And I don't want to change it.