| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,132 Posts1,056,378 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2007 Posts: 230 Shop Shark | | Shop Shark Joined: Feb 2007 Posts: 230 | I plan to put a TPI 350 v-8 in a '62 C-10 , which has an original 235 in it now. I believe I will have to run a new wire from the ignition switch to the TPI coil since I believe the present wiring is resister wiring. Am I correct on this, or is there no need to replace the ignition wire ? My second question is the alternator. Will the present one which I believe is either original or an original replacement be enough to handle the F.I. electronics includingl the electric fuel pump ? Thanks in advance. | | | | | Joined: Jul 2004 Posts: 5,708 'Bolter | | 'Bolter Joined: Jul 2004 Posts: 5,708 | Tim K,
I think you are right on the resistance wire to the coil. If your TPI setup wants full voltage, you will have install a conventional wire. I think your truck originally came with a generator. If it has been changed to a alternator, hopefully it was a more modern internally regulated style...no voltage regulator on the firewall.
A electric fuel pump isn't a power hog, so I'll bet a average alternator would be sufficient for the task. New alternators are cheap and can be had in moderate amp and high amp outputs which would replace yours if need be. What other items do you plan for the truck that might need extra power?
Stuart | | |
|
|
| |
