| |
Click on image for the lowdown. 
====
| | |
8 members (Bill Hanlon, Jon G, 55shaker, Otto Skorzeny, HandyAndy, UtahYork, DadsFirstPickup, Hotrod Lincoln),
78
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,036 Posts1,055,448 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2014 Posts: 173 Shop Shark | | Shop Shark Joined: Feb 2014 Posts: 173 | Good morning. The driver side door on our 1952 3100 is not aligned correctly. You have to slam the door to get it to stay shut and even then, the door extends out from the cab about 1/8 of an inch. I took the striker plate off to see how the door sits in the frame. The top near the upper/back part of the window seems to make contact with the cab first. The door from the handle down sticks out about 1/8 of an inch (or maybe a little more). I am assuming I need to make an adjustment at the hinge. Am I adjusting the upper hinge outward or the lower hinge inward? I've never done this before, so any insight/assistance would be appreciated. Here is a picture of the side of the truck.
Ron and Ryan Hill
1952 Chevy 3100 | | | | | Joined: Jun 2011 Posts: 1,901 Shop Shark | | Shop Shark Joined: Jun 2011 Posts: 1,901 | Have you looked in the manual? For your type of adjustment it says to bend the hinge I believe.
Give me ambiguity
or give me something else
| | | | | Joined: Feb 2014 Posts: 173 Shop Shark | | Shop Shark Joined: Feb 2014 Posts: 173 | I have not. Just picked up a shop manual this weekend. Wasn't expecting it to have something related to this. I'll give a look when I get home.
Ron and Ryan Hill
1952 Chevy 3100 | | |
|
|
| |
