The Stovebolt Site Forums The Shop Area General Truck Talk School me on these rear bumpers!

On my 56 it looks very fabricated but there are so many trucks with very similar rear bumpers.
Was it some kind of dealer supplied extra or an aftermarket accessory for trucks without rear bumpers?
Not as pretty as a factory bumper but more functional.
Many Thanks
Richard

[IMG]http://i711.photobucket.com/albums/ww112/hotroddickie/photo4_zpsdac67a6d.jpg[/IMG]

Maybe it is a Barden Bumper?

However, many Barden Bumpers went around part of the rear feners (they seem to often cause tears in the fenders).

Original patent illustration.

My truck had a similar bumper on it when I purchase it. Let me tell you that is was not fun to remove...welded very solidly to the inside of the frame rails. I cut the support of flush with the end of the frame rail and left the 1/2" thick metal welded to the inside of the frame rail. New holes and no problem expected when I bolt the factory rear bumper supports to the outside of the frame rails.

Rear bumper

I recently had a conversation over at the Classic Parts truck forum concerning rear bumpers. As I stated there I am in the market for a similar bumper as the Barton if I can find one. I recently observed how tin foil like the made in china junk is out there. I stated that I would NOT be seen dead with another of those on the rear of my truck. I also am looking to incorporate a receiver hitch.
Jerry

Thankyou yes it looks like one of these.

Richard