well after stripping down the fenders,hood grill etc. from my 61 I finally got the nerve up ( I think) to tackle the rocker panel replacements. I spent about an hour and a half yesterday drilling out spot welds and starting to peel away the right side one at the rear post. it looks like it's going to be a long tedious process. I'm sure by the time I get the right side done and move to the left side I'll learn a lot of tricks but this is the part I was dreading most because looks like getting it out along with the rotted rear cab support and getting into all the tight places to cut away and weld back will be tough. anyway anyone with a good tip is sure appreciate. have a Happy new year. Raymond