Pull the bumper assembly from the frame then, the front clip
should come out as a unit by pulling the bolts that hold the
inner skirt and heal of the fender to the toeboard, the two
brace rods from the fender to the cowl, the two bolts under the
core support and of course the hoses and wires. Then your two
strappin' young lads should be able to lift it right out.
Started this earlier before I went out to shovel snow.
I'd pull the radiator just to protect it from getting
bumped.
The grill, being bolted in all around the opening,
will require most of the fasteners that hold the rest
of the sheet metal together to be removed. At this
point there are just a few bolts holding the fenders,
innerskirts and core support together so you may as
well just finish disassembling it all.
DG
Last edited by Denny Graham; 12/31/2013 5:17 PM.
