| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,062 Posts1,055,851 Members48,428 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2011 Posts: 1,901 Shop Shark | | Shop Shark Joined: Jun 2011 Posts: 1,901 | The trick for me was making sure there was solid support under the hinge not just held in the vice. I had a 2x3x4 block of Al and a sacrificial old socket that I use for stuff like that. I also found the hardest one of mine was actually rusted in 3 pieces and didn't want to drive out. Kroil, 5lb jack, and solid support at the point of impact... I don't have a press 
Give me ambiguity
or give me something else
| | |
|
|
| |
