I am rebuilding my hood, has anyone done this before?
I have cut the spotwelds and removed both inner braces. I have them sanded, primed, and painted as well as the outer skin.
I ordered and have the hood foam seals from Classic Parts.
My question is this: There are two small seal pieces in the kit that will attach to each inner braces (total of 4 pieces) so which ones go where?
The trick is that each set of seals are of different thickness. (2 that are just over an 1/8 inch thick) & (2 that are a 1/2 inch thick)
My logic is telling me that the thicker seals would go on the rear brace where there is more movement to the outer skin.
Does anyone know for sure?

BTW, I know that the long seals will be used on the bolt in cross braces that tie the forward and aft inner braces together.