| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,156 Posts1,056,871 Members48,456 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2012 Posts: 60 'Bolter | | 'Bolter Joined: Feb 2012 Posts: 60 | Guys,
i need the width across the cab floor from lower hinge post to the other side - preferably as close to floor as possible. I took every measurement but this one when began my resto.
I first replaced the lower hinge post and put in a patch using the old floor edge and outer cowl as reference points. Then I moved onto the floor and side rail. But now I have a 3/4 in gap where the hinge patch meets up with the side rail/floor. I have cab x-braced. Fitting up the floor, front cab support. and bracket tells me that the floor is good but I am off on the hinge post. Before I redo, i want to be sure. Hope this is clear. I posted a couple of new pics. thanks
1967 Chevelle Malibu (2nd owner)
1951 Chevy 3100
| | |
|
|
| |
