| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,048 Posts1,055,540 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2001 Posts: 1,094 'Bolter | | 'Bolter Joined: Feb 2001 Posts: 1,094 | The pins should unscrew( is that a word). The bushings should come out with a puller/press. make one out of some threaded rod and an old socket,a piece of pipe and some washers and nuts.
You can clean the frame where the bushings go with carb/brake cleaner, it probably won't be that dirty/rusty. A little oil on the bushings before you press them in won't hurt anything and don't reuse the zerks, the new bushings should have new ones. When finished grease the bushings with the wheels off of the ground.
Tommy
59 apache 1/2t
261 short stepside
| | |
|
|
| |
