| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,196 Posts1,057,385 Members48,469 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2001 Posts: 5,337 'Bolter | | 'Bolter Joined: Jan 2001 Posts: 5,337 | There is a brass bushing in the rear support.
Originally the support and bushing would have been replaced as one unit.
The OD of the bushing is a standard size(don't remember the size right off). I have bought bushings from a bearing house that fit the OD and have a smaller ID than original. I then turn the yoke down to fit the new bushing ID.
If your yoke is not to bad the replacement bushing can be bored out to fit the yoke.
See the USA in your vintage Chevrolet! My Blog | | |
|
|
| |
