The Stovebolt Site Forums The Shop Area The HiPo Shop Bent tie rod end!

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

4 members (Robert Crandall, Hotrod Lincoln, 3800GUY, 1 invisible), 69 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,082

Posts1,055,961

Members48,430

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Bent tie rod end! BossHawg #925573 03/07/2013 5:23 PM
Joined: May 2005 Posts: 8,983 West of the Rio Grande B bartamos Sir Searchalot
bartamos Sir Searchalot B Joined: May 2005 Posts: 8,983 West of the Rio Grande	If the rear shackles and hanger brackets are original and in place, if the springs are original and the spring/perch pin is in the hole and the ubolts are tight, it's probably OK. Right is right, even if everyone is against it, and wrong is wrong, even if everyone is for it. - William Penn

Entire Thread
Subject	Posted By	Posted
Bent tie rod end!	BossHawg	03/04/2013 6:21 PM
Re: Bent tie rod end!	hd4unm	03/05/2013 8:26 AM
Re: Bent tie rod end!	don stocker	03/05/2013 8:37 AM
Re: Bent tie rod end!	BossHawg	03/05/2013 9:07 AM
Re: Bent tie rod end!	BossHawg	03/05/2013 9:11 AM
Re: Bent tie rod end!	bartamos	03/05/2013 2:08 PM
Re: Bent tie rod end!	BossHawg	03/05/2013 2:25 PM
Re: Bent tie rod end!	BossHawg	03/05/2013 2:27 PM
Re: Bent tie rod end!	bartamos	03/05/2013 10:56 PM
Re: Bent tie rod end!	goneagain	03/07/2013 5:40 AM
Re: Bent tie rod end!	BossHawg	03/07/2013 8:43 AM
Re: Bent tie rod end!	Joe H	03/07/2013 1:18 PM
Re: Bent tie rod end!	bartamos	03/07/2013 5:23 PM
Re: Bent tie rod end!	hd4unm	03/07/2013 11:47 PM
Re: Bent tie rod end!	BossHawg	03/08/2013 6:37 AM
Re: Bent tie rod end!	BossHawg	03/12/2013 6:57 AM
Re: Bent tie rod end!	bartamos	03/12/2013 10:04 PM
Re: Bent tie rod end!	BossHawg	03/13/2013 7:07 PM
Re: Bent tie rod end!	bartamos	03/14/2013 1:10 PM
Re: Bent tie rod end!	BossHawg	03/14/2013 6:27 PM
Re: Bent tie rod end!	BossHawg	03/14/2013 6:25 PM

Moderated by Fibonachu, KCMongo

Hop To

Link Copied to Clipboard