I though Ive heard a few ppl put 216 and 235 carbs together..
wrenchbender rat said
"What about useing the top of the 216 carb on the 235 carb. Change the main jet & power valve spring. Then you will have your manual choke."

I hooked my vac advance on the tube that goes from the throttle body up to the choke on the bc.

I think if it was a manifold leak id be starving for fuel right? cause it would be drawing air.

I cant use propane, my idel is rev'ed up high.

can i put a 55 up 235 rochester b throttle body on my 216 b?

Id try to grind out the holes on the 216 so it will fit the 235 manifold, but when i tryed to remove the throttle shaft, the brass screw snapped off in the throttle shaft. can i drill them out and go bigger?