| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,021 Posts1,055,357 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#91233 03/26/2002 9:33 PM | Joined: May 2001 Posts: 9 Junior Member | | Junior Member Joined: May 2001 Posts: 9 | Yep...I did this too...I was able to fix mine with a piece of the "straw" from a WD-40 can.
Just slip the straw over the leftover stub of the needle and then slip this onto the remains of the needle in the speedo case.
Took a lot of trial and error to get the length of the straw just right...I also put a small dab of glue in each end of the straw to hold it all together.
If yours is a clean break at the speedo with no stub, then I can't help. | | |
|
|
| |
