| |
Click on image for the lowdown. 
====
| | |
9 members (Wayne67vert, DaveV, Phak1, Eisenholtz, Ponchogl, Bill Hanlon, 55shaker, Rusty Rod, TUTS 59),
159
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,049 Posts1,055,546 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2012 Posts: 59 Wrench Fetcher | | Wrench Fetcher Joined: Jul 2012 Posts: 59 | I took the distributor out and turned the pump with a drill and oil came up to the rocker assembly. I put the distributor back in and made sure it was lined up. I went to start it up and now I have no oil pressure. I installed a oil pressure gauge and was getting 25psi on the gauge with the drill. Should I go from the t fitting on the lower part of the block to the top of the head with say brakeline to get oil up to he head? I also cleaned the strainer so I know its not plugged. | | |
|
|
| |
