| |
Click on image for the lowdown. 
====
| | |
2 members (Wooley, 59 fleet),
70
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,096 Posts1,056,488 Members48,444 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2011 Posts: 133 Wrench Fetcher | | Wrench Fetcher Joined: Dec 2011 Posts: 133 | I have a couple YF's and W-1's I am planning to rebuild and thinking about installing throttle shaft bushings. The shafts are pretty good shape but sloppy in the body. I have been looking at the ZACO tool made by throttleshaftrepair.com but was wondering if anyone knew any other place to purchase a reamer for a do it yourself repair, meaning no special equipment needed. Also looks to me that the ridged bushings with a 3/8" outside dimension would be to big. Anyone have experience with this. Thanks
If you never tell a lie, you never need to remember what you said.
| | |
|
|
| |
