| |
Click on image for the lowdown. 
====
| | |
8 members (GRNHydra, David Bush, JW51, Oswald, Otto Skorzeny, Wally / Montana, Guitplayer, NJC),
104
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,060 Posts1,055,838 Members48,427 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#90326 02/05/2005 3:28 PM | Joined: Feb 2001 Posts: 80 Wrench Fetcher | | Wrench Fetcher Joined: Feb 2001 Posts: 80 | Make sure it is out of gear!!!!!!! If you still have a good ballist resistor run one wire from it to pos. side of coil. The other side of ballist run wire to battery pos. Now with jumper cables hook the red cable; battery pos. to big post on starter
the black cable batery neg. to engine block for good ground source. You should now have 12 volts to coil. Push the starter button it should run. Remove a black clamp to shut off. Note the 6 volt coil will get hot if you do this too long. If you have any 12 volt coil use it instead of the 6. | | |
|
|
| |
