Here's an idea I had this past weekend on how to organize body hammers and dollies and reduce the clutter on the workbench. It was aggravating having 3 or 5 different hammers I needed but in the way laying on the table. Also gives a place to store dollies.

It's 8" wide, 19" tall, the slots for the handles are about 1.5-1.625" wide.
top is made of 1/4" round, post are 3/8" round, bottom is 16ga sheet with 1/8"x1/2" sides. Length I'd make the tray probably 10" and the rack on top 14 or 15" to have plenty of room... mine's a little smaller (and full) but I sure wouldn't go shorter than an 8" tray and about 11-12" rack.

Before
http://rides.webshots.com/photo/2578824430080251109KlFrsk
The solution
http://rides.webshots.com/photo/2714539850080251109oAzmzg
After
http://rides.webshots.com/photo/2644841830080251109yKuZMa

It's got a handle of sorts on top and is easy to move around, take them to the work.

Grigg

•1951 GMC 250 in the Project Journals
•1948 Chevrolet 6400 - Detroit Diesel 4-53T - Roadranger 10 speed overdrive - 4 wheel disc brakes
•1952 Chevrolet 3800 pickup
---All pictures---
"First, get a clear notion of what you desire to accomplish, and then in all probability you will succeed in doing it..." -Henry Maudslay-