| |
Click on image for the lowdown. 
====
| | |
1 members (Bill Hanlon),
137
guests, and
9
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,078 Posts1,056,027 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#87456 03/05/2002 5:48 AM | Joined: Jan 2002 Posts: 2,839 'Bolter | | 'Bolter Joined: Jan 2002 Posts: 2,839 | While I have put my gas gauge problem on the shelf for a few hours, I'm overhauling my
StopRay lights in back. When I converted from 6 to 12 volts, the upper (brake) bulb fits ok.
But using the same size bulb for the lower (tail) is a dimensional issue. It's just too big. I cannot
install the license plate glass in the driver's side fixture due to the size of this lower bulb. Also
the red lens is smashed up against this same bulb so I cannot properly fasten the outside lens
frame. What smaller size 12 v bulb with same base diameter and post dimension can I use?
Craig My '50 Chevy 3100 5 window, '62-235cu, 3:55 rear My truck ....... Respect The Rust If I'm not working on my truck, '65 m00stang or VW camper, I'm fishing with the wife or smoking Salmon.
| | |
|
|
| |
