| |
Click on image for the lowdown. 
====
| | |
9 members (Paul_WNC, HandyAndy, Bill Hanlon, gswbbc, Wally / Montana, baldeagle, Woodcmiami, Joe H, tonyt),
115
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,040 Posts1,055,475 Members48,424 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2006 Posts: 1,847 'Bolter | | 'Bolter Joined: Oct 2006 Posts: 1,847 | try an easy out, they work once in a while. Use the punch method described above. heat might help, just be careful. Get a set of left handed drill bits, often the broken piece just unthreads. (probably too late now for this problem, just good info for later) you will probably end up going to the machine shop for this though... | | |
|
|
| |
