| |
Click on image for the lowdown. 
====
| | |
7 members (MickeyP, jmoore, GMCJammer51, TPR57C, Eisenholtz, 55shaker, 1 invisible),
107
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,115 Posts1,056,627 Members48,450 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2002 Posts: 2,549 'Bolter | | 'Bolter Joined: Dec 2002 Posts: 2,549 | I shortened a 2 ton COE from 158"in. down to 134"in. Seeing how these older truck frames taper as you get towards the rear, you just can't move the rear axle forward, & cut the overhang as you can later model trucks. What I did was made a cut just before the first cross member, then made the same cut just before the second cross member, then removed that 24"in. section, then welded back together. Didn't even have to do any drive shaft work. Went from three drive shafts, to two. Only had to splice my brake lines back together. Finished product was a factory correct 134"in. wheelbase. | | |
|
|
| |
