Thanks Denny. I am sure I will just get a set of steel rims and some tires. I am thinking 16 inch but need to know the maximum width of the rim that will work with my stock 1950 3600. So, will 16 x 7 work or 16 x 6 , etc. Then I will get a set of radials.
David.
I assume you have the original 15" two piece rim? Don't waste any time or money on them.
All you’ll be able to mount on them are bias plies with tubes and flaps. Might even have a
hard time finding a shop that will work on those rims. Best bet is to just get rid of them
and find a later set of eight lug tubeless rims. There’s a discussion started on that subject
every other day here on the forum so you can do a search and start reading opinions on
which rim is best suited till the cows come home. There is no definitive one best rim
answer for stock rims so be prepared for some confusion. If you have deep pockets then
you can have rims custom made to your diameter and width with the proper back spacing
for around $100 each.
Denny Graham
Sandwich, IL
