The Stovebolt Site Forums The Shop Area The Tool Chest Newb at welding. Flux core or gas?

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

1 members (DES57), 119 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,193

Posts1,057,257

Members48,466

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Newb at welding. Flux core or gas? Tango #830836 02/29/2012 5:12 AM
Joined: Feb 2012 Posts: 96 California 5 513600 Shop Shark
513600 Shop Shark 5 Joined: Feb 2012 Posts: 96 California	Much easier to get good welds with mig and .023 wire as opposed to flux core on sheet metal. doing the weld as short pulses with a little practice you can even weld up rust pin holes

Entire Thread
Subject	Posted By	Posted
Newb at welding. Flux core or gas?	Lugnutz	01/12/2012 3:38 AM
Re: Newb at welding. Flux core or gas?	Achipmunk	01/12/2012 4:06 AM
Re: Newb at welding. Flux core or gas?	R-Bo	01/12/2012 5:28 AM
Re: Newb at welding. Flux core or gas?	crenwelge	01/12/2012 6:54 AM
Re: Newb at welding. Flux core or gas?	Lugnutz	01/12/2012 5:03 PM
Re: Newb at welding. Flux core or gas?	R-Bo	01/14/2012 3:30 AM
Re: Newb at welding. Flux core or gas?	Lugnutz	01/14/2012 5:23 AM
Re: Newb at welding. Flux core or gas?	mo	01/15/2012 8:57 PM
Re: Newb at welding. Flux core or gas?	Lugnutz	01/16/2012 12:52 AM
Re: Newb at welding. Flux core or gas?	CASO	01/17/2012 12:51 AM
Re: Newb at welding. Flux core or gas?	mo	01/17/2012 4:53 AM
Re: Newb at welding. Flux core or gas?	di1953gmc	01/17/2012 9:43 PM
Re: Newb at welding. Flux core or gas?	Whitedog	01/23/2012 6:32 PM
Re: Newb at welding. Flux core or gas?	Tango	02/27/2012 2:58 AM
Re: Newb at welding. Flux core or gas?	513600	02/29/2012 5:12 AM
Re: Newb at welding. Flux core or gas?	Daniel Bland	02/29/2012 6:31 AM
Re: Newb at welding. Flux core or gas?	Daniel Bland	02/29/2012 6:33 AM
Re: Newb at welding. Flux core or gas?	Lugnutz	02/29/2012 7:18 PM
Re: Newb at welding. Flux core or gas?	Mike B	02/29/2012 8:04 PM
Re: Newb at welding. Flux core or gas?	CASO	02/29/2012 8:43 PM
Re: Newb at welding. Flux core or gas?	Mike B	03/01/2012 5:57 AM
Re: Newb at welding. Flux core or gas?	Daniel Bland	03/01/2012 1:03 PM
Re: Newb at welding. Flux core or gas?	Dado	03/07/2012 1:27 AM
Re: Newb at welding. Flux core or gas?	MNSmith	03/07/2012 6:12 AM
Re: Newb at welding. Flux core or gas?	Dado	03/07/2012 3:06 PM
Re: Newb at welding. Flux core or gas?	Jim Bow	03/10/2012 9:36 PM
Re: Newb at welding. Flux core or gas?	GMCpanel	03/11/2012 3:17 AM

Moderated by MNSmith

Hop To

Link Copied to Clipboard