| |
Click on image for the lowdown. 
====
|
| |
1 members (delky),
65
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,049 Posts1,055,740 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
|
| THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
|
| | | Joined: Nov 2010 Posts: 304 Shop Shark | | Shop Shark Joined: Nov 2010 Posts: 304 | If your patch panels do not go as far as the corners u should be ok. Some left and right patch panels go from the front of the seat frame to approx. 6 inches up the angled surface headed to the firewall. Neither goes as far as any corner. Rocker side edge yes, but not a 'CORNER". That is where the strength would be, in the corners. If u are messin with any more than 1 corner at a time. I would do some bracing first.
'52 3100 "once a Marine, always a Marine!!
| | |
|
|
| |
