Originally Posted by Mike B
Super55,

Jim Carter's MC's on that page are for the 1/2 ton trucks with the 1-1/8" bore. The 1-1/2 ton trucks use the 1-1/4" bore MC's.

If you MC is not pitted you can rebuild it with a kit from NAPA...if it is pitted you can send it to Serria Specility Automotive and have Joe put a brass sleeve in it. New MC's are hard to find for the big trucks.

Mike B smile


If you scroll down to part Item # ME166 it is for 1 1/2 ton.

A day without laughter is a day wasted- Charlie Chaplin
When wrestling a grizzly bear, you have to keep at it until the bear gets tired, not when you get tired.
1948 Chevy 2-Ton