I didn't do it. My panel was converted at some point. Actually, there might be some pictures in my photo bucket if you scroll through. Basically, there is a regulator bolted to the wall access panel. I'm too lazy to take the truck apart to take pictures of it.
Here's my photo thing:
http://s221.photobucket.com/albums/dd45/HomeCrafter/You can see here the inside of the passenger side. The access panel is out, and the window is held up with a stick.
http://i221.photobucket.com/albums/dd45/HomeCrafter/IMG_3070.jpgThe glass just squashes into the regulator channel with butyl setting tape.
With the panel in place, all you see is the crank.
http://i221.photobucket.com/albums/dd45/HomeCrafter/IMG_3071.jpgWhen I have it all apart (I need to replace the wood, and the tracks are worn out, I'll take a bunch of pictures and post them here in the burn/panel section.
