| |
Click on image for the lowdown. 
====
| | |
2 members (Joe H, Naturalthud),
196
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,080 Posts1,056,062 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2010 Posts: 135 'Bolter | | 'Bolter Joined: Jun 2010 Posts: 135 | I installed a new rear tail light harness on my 64 k10. Electical worked perfectly before replaced everything. Now the left signal blinks in the "hazard" sequence. The right tail light works fine. Brake lights work fine too. Only the left signal when switched has the hazard light sequence. I mounted the bed with rubber bushings/pads. I first thought the tail lights lost ground with the bushingsz/pads in place....I ran a ground from each taillight to a clean bolt ....thinking I've got ground.
Any one have thoughts on what might be going on? I should also add that I have running lights on the roof and the now blink withe the left signal too.
Appreciate any thoughts. John
1964 K10 Fleetside Pickup Truck
| | |
|
|
| |
