| |
Click on image for the lowdown. 
====
| | |
7 members (Guitplayer, FAST55, Leo, Oldcaliforniakid, lc_btv, MikeE, Jay R),
83
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,050 Posts1,055,673 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2010 Posts: 202 'Bolter | | 'Bolter Joined: Oct 2010 Posts: 202 | On my 54 3100 I had to disassemble my master cylinder by removing the fitting on the end where the brake lines go and with a long skinny bolt drive the piston out with a hammer. It was really mucked up. In the process the spring was destroyed. I thought - no biggy the master cylinder kit will have a new one. NOT!! The master cylinder kit I bought from Napa Auto Parts (#146) did not have a new spring in it.
Does anyone know where I can find or have a spring that will fit my 1-1/8" bore master cylinder?
I would greatly appreciate and assistance.
Walt Williams
La Verkin, UT
Last edited by 54Belair; 10/05/2011 2:31 AM.
| | |
|
|
| |
