| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,037 Posts1,055,463 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2001 Posts: 3,887 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Jul 2001 Posts: 3,887 | that shop manual pic is misleading, note the offset jog in the middle of the pin where they "photochopped" it .... mounting the front that low would give problems with misalignment stresses on the rear mounts and the trans angle to the front U-joint
what's the V8 you're trying to install? do you have the correct engine brackets? are they in the right place?
the mounts from the vendors are correct and work fine in any 56-58 I've put them in with 283's and 350's, there will be a problem with clearance for an HEI, but the stock valve covers shouldn't be touching
Bill | | |
|
|
| |
