| |
Click on image for the lowdown. 
====
| | |
0 members (),
196
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,081 Posts1,056,078 Members48,434 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2003 Posts: 27 Junior Member | | Junior Member Joined: Mar 2003 Posts: 27 | I just got a nice set of kingpins and bushings for the front end of my '38 half-ton. The pins are supposed to be 0.7335 inches (can't measure that accurately with vernier calipers !) and the bushing are undersize. My question is: what's the proper clearance to establish between the pin and the bushing ? My guess would be 0.001 diametral clearance or less. I'm assuming I'll need to get there with an adjustable reamer, as none of my industrial catalogs list a reamer of the proper diameter.
Thanks !
Alex Meade
Lexington, KY | | |
|
|
| |
