| |
Click on image for the lowdown. 
====
| | |
9 members (warlock, mick53, 55shaker, fonz8261, Ponchogl, RoadsScholar, Gdads51, Otto Skorzeny, 32Fordpuchoptop),
105
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,048 Posts1,055,626 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2009 Posts: 57 Wrench Fetcher | | Wrench Fetcher Joined: May 2009 Posts: 57 | Hi,
I have a 66 c20 which has become almost a daily driver. The ball joints are original and completely shot, so I have saved up and purchased new upper and lower ball joints and am getting ready to swap them in. I am thinking while I am i there I should also replace tie rod ends? Correct? Is there anything else that would be "mandatory" while I am in there? If so, please inform cause I only want to do this once. I am not building a show truck or looking for perfection, just a safe clean truck that drives in a straight line. Thanks much in advance! | | |
|
|
| |
