doggone ive got myself in a deeper mess here. when follwing shop manual advice i unbolted bolts and moved shifter box up to get right clearance. i thought the two bolts above the shifter box needed to come out. now thast clamp has grooves in the upper and lower shafts that the bolts has to go back inside to fit right. anyway the lower shaft has been turned to try an aline the bolts. so now i have a real big mess. still can not get car into any gear and shifter inside still gos all the way to the left and will not come down past netural position. i believe the bottom of the shafts are splined and will only let you turn them so far to line things back up. yikes help ive really got my self into a pickel here. any help will be appreciated and all of past help a few days ago was appricated thanks ted