Your '54 should have a tee out the back of the master cylinder. The line that goes around the left side of the MC supplying the left front wheel cylinder is about three feet long. The one that loops around and follows the cross member to the tee on the right side of the frame supplies the right front and two rear wheel cylinders and is about four feet long.
You can get new pre-made lines at any FLAPS or farm supply that will get you close to the correct length. Or you can order pre-made lines the are bent to fit from several companies such as Inline Tube, Classic Tube and almost all of the vendors carry pre-bent brake and fuel lines for the AD trucks.
Denny Graham
Sandwich, IL
Last edited by Denny Graham; 07/13/2011 7:58 PM.
