| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,080 Posts1,055,946 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2011 Posts: 27 New Guy | | New Guy Joined: Mar 2011 Posts: 27 | Hi from at last sunny England
I need some advise please
i have a 54 3100 with a 76 camaro front clip, i need to change the sway bar bushes.
i measured the bar to be 15/16", so ordered camaro bushes to fit a 15/16" bar with mounting tabs on the clamps
(moog part number k5241).
when looking at the new bushes and test fitting them on the bar, the holes in the bushes are only about 3/4" so to close up the bush it will have to go about 3/8"
is this normal?
It seems that the bush clamp is going to struggle to close up this difference without stripping the bolt holes in the chassis
Any advise would be good
Keith
if it ain't greasy it ain't diddly
| | |
|
|
| |
