| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,113 Posts1,056,618 Members48,450 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Feb 2010 Posts: 38 Wrench Fetcher | | Wrench Fetcher Joined: Feb 2010 Posts: 38 | You should have spacers between the upper and lower large steel washers. The spacer is what sets the load on the bushings, not the torque of the bolt. If there are no spacers I would look into getting them.
As for nyloc nuts the torque specs are the same. The nylon does not change the torque spec of the bolt to any large degree. Torque specs on 1/2 inch bolts is around 90 foot pounds.
The glass is twice as big as it needs to be.
| | |
|
|
| |
